Jump to content

Agfa FP200 Problems


Cmarts1

Recommended Posts

Hello

We are currently having some difficulties using our FP200 C41.

It simply wont cut the films when it reaches the end. And we end up having film

jams. Leader cards coming through without film etc...

We have tried to get into the blades but it all seems rather complicated.

I wonder if anyone has had any experience with this sort of problem or if

someone could let us know exactly how to get to the cutting blades.

Any Help greatly appreciated..

Many Thanks

CMARTS

Link to comment
Share on other sites

Long screwdriver, take off front panen under set box. Undo screws holding setbox from within the front power / electronics compartment. Open setbox - loosen three screws that locate the setbox - these are at the top of compartment. Box then simply slides up and off. Don't forget to turn power off at wall first.

Probably tape across sensors or similar

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...