Jump to content

Agfa MSC 2-3 repair manual needed. HELP!!!


POZITIVE

Recommended Posts

  • 3 weeks later...

  • 2 weeks later...

The problem seems to be in MDV plate.

Ocasionally the microstep paper drive that advances paper from stocker to processor whether stops functioning or turns to opposite direction and throws paper all way down to stocker

Followed with PAPER JAMMED IN PROCESSOR ENTRANCE/PAPER JAMMED IN PRINTER

Now we know that slight bumps on the plate make the drive work again, but haven't found the exact problem yet.

There were some other issues, but they are all sorted out now.

Link to comment
Share on other sites

  • 2 weeks later...
  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...