Jump to content

power porblem with agfa 101.d


Recommended Posts

I have a 101.d.  I recently had developer contamination and just finished cleaning and refilling.  Upon start up, I had many different error messages including mask error, something relating to the scanner and print lamp too dim.  I decided to tackle the print lamp first, and tried to shut the machine down.  It was stuck in start up mode.  I proceeded to shut it off at the breaker.  I changed the print lamp and turned the machine back on.  NOW I HAVE NO POWER.  The beeping from the film processor is driving me crazy!  Does anyone have any ideas as to how I can fix this.  Agfa offers no support! Thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...