emmaachile Posted August 8, 2011 Report Share Posted August 8, 2011 This is my major problem on the Doli Machine but apart from that, the machine is almost perfect. The cutter keeps rotating 360 degrees continuously. i have changed up to 4 sensors but still is not working. Anyone with any idea on how to solve this. My local technician seems clueless as to what to do. Quote Link to comment Share on other sites More sharing options...
Mark Amies Posted August 9, 2011 Report Share Posted August 9, 2011 Have you contacted Doli directly? Which county are you in? Quote Link to comment Share on other sites More sharing options...
emmaachile Posted August 10, 2011 Author Report Share Posted August 10, 2011 Nigeria Quote Link to comment Share on other sites More sharing options...
Doli Service Posted August 19, 2011 Report Share Posted August 19, 2011 the problem you described can be easily solved! It could be caused by the following reasons: 1. Home position sensor has failed or its position is not correct that results the arm of cutter couldn't get it blocked while it is in home position, so it keeps rotating. A bad connectivity of its wire or connector of the cutter unit can also cause the problem. 2. Platform PCB is out of order, if this happens occasionally, the it may be fixed by reflashing chips. 3. The firmware in Master PCB is not complete. All components are controlled from this part, normally re-flashing will resolve the issue. ------ Minor possibility!!! For any other question, please contact me at sun24hours@yahoo.com, I will be glad to help. Quote Link to comment Share on other sites More sharing options...
bamdyking Posted March 8, 2013 Report Share Posted March 8, 2013 hello, i have a similar problem with a DOLI3620 cutter failure, have changed the 2 cutter sensors to a new one and also changed the motor controlling the sensors, tested the sensors for continuity but still the problem persist, what can i do please very urgent. Quote Link to comment Share on other sites More sharing options...
emmaachile Posted December 25, 2013 Author Report Share Posted December 25, 2013 Have you solved your problem? Contact skysnap in Ikeja, Lagos if you stay in Nigeria Quote Link to comment Share on other sites More sharing options...
Sait Terekli Posted December 26, 2013 Report Share Posted December 26, 2013 This is my major problem on the Doli Machine but apart from that, the machine is almost perfect. The cutter keeps rotating 360 degrees continuously. i have changed up to 4 sensors but still is not working. Anyone with any idea on how to solve this. My local technician seems clueless as to what to do. Hi, could you send mi linux recovery CD copy. i will give it who has doli 0810 miniab. he has no any cd. where can i download it please upload linux recovery cd to an address where you want. Sait Terekli Quote Link to comment Share on other sites More sharing options...
DKHECHI MED Posted December 30, 2013 Report Share Posted December 30, 2013 https://drive.google.com/?authuser=0#folders/0B34pZ2FXDDH4QTJGVEl3VTNacDA First save the iregedit and tables in windows pc 2nd install new linux (press install in linus display to confirm the instalation) 3th go to win-software and see the note instruction 4th GOOD YEAR 2014 for you and for all 5th you contact me in facebook (MOHAMEDHILALY) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.