Trevor brown Posted August 26, 2011 Report Share Posted August 26, 2011 We are currently having a 5V power problem, normally it just stops the printer, then with a printer reset we are up and running, yesterday however it took out the scanner , printer and both wet sides. Warning was to do with a Micro switch / 5v power problem. Its all running fine now, we just swithched machine off then on again, had to do it twice. I am thinking this problem is down to the power supply fluctuating ? problem with it. Whilst I have the various spare parts which supply do I change. The Big 24V on the MDU panel behind the printer or the power supply below the Film Processor Motor. Cheers Trev Quote Link to comment Share on other sites More sharing options...
Minilab service Posted September 2, 2011 Report Share Posted September 2, 2011 Hi. I think it is some problem with PFC inside power supply, or protection circuit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.