Jump to content

problem mith my masterlab


Recommended Posts

hi everybody

i have this serious problem with my masterlab . i spoke with a lot of people but noone knows whats really the problem is

when the minilab starts and trying to make intializing there is this massage on the board

program stopped

cardinal overflow

check the numbers bellow

cs/ip E: 930:0675  PROCESS:3B00 L4"

i tryied taking out all of the cables from the cpo 1 board and cpo2 board and after putting them one by one

i found out that the problem starts when i connect the papertrans sens j407

does anyone have this problem before? is it from the cpo board?



Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...