derek Posted September 3, 2005 Report Share Posted September 3, 2005 hi, wonder if any one has come across this problem on a 520 master lab i have owned the machine from new and has given me no problems really until now, here goes when trying to initialise the machine or do any thing on the head or try to load from the card the machine trips out and switches off,i switch it off at the wall back on again try to initialise and it does the same again,anybody any clue as to what the problem might be?its heating the chemistry ok and powering up alright,i did have a different problem prior to this and it may be connected as the temperature rose in the dryer the machine was also tripping itself off. any help would be much appreciated,any one know of a good engineer based in scotland who doesnt charge the earth just to look at the problem. regards derek. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.