photocare Posted October 15, 2009 Report Share Posted October 15, 2009 Hi, My Konica R2 has suddenly started to print slowly, it is running at about 300 prints an hour, as opposed to it's usual speed. There is about 13 seconds between each 6x4. It has only just started to do it in the past week, it was fine before. Any suggestions please. Thanks, Tim Quote Link to comment Share on other sites More sharing options...
Bangroy Posted November 4, 2009 Report Share Posted November 4, 2009 Re-instaling ===> PC DP : Linux and DP software and PC WS : Windows and R1 software usually in the form of a file GHOST ;) Quote Link to comment Share on other sites More sharing options...
taspap50 Posted November 26, 2009 Report Share Posted November 26, 2009 Try to replace lan cable between DP and WS . Omit Hub and use direct lan crossover lancable Quote Link to comment Share on other sites More sharing options...
photocare Posted January 21, 2010 Author Report Share Posted January 21, 2010 Thanks, A new LAN X-over cable and the removal of the hub got it back to full speed. Quote Link to comment Share on other sites More sharing options...
sebastian Posted October 6, 2014 Report Share Posted October 6, 2014 NECESITO LA IMAGEN DE LA DP2010E QUIEN ME AYUDA Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.