Jump to content

exposure advance unit hold on 2901sm


wmphoto

Recommended Posts

hi thank you for the information can you plese tell me where i can test the 2 flag sensors in oinput check mode and lock unit is moving in the output chek mode

i believe its FUNCTION MENU EXTENSION MATIENCE INPUT CHECK   PRINTER OR PROCESSOR    THEN I DONT KNOW WHERE TO GO FROM HERE  

Link to comment
Share on other sites

I have replaced the motor unit BY A TECH since it was broken AND because of the error message and for some reason the im still getting the error message  exposure advance hold error 6053-0001

I was able to go into input chek mode printer exposure advance section and the exposure advance unit fix sensor 1 & 2  both show lite and the exposure advance unit move sensor 1 shows dark 2 shows lite  I HAVE NO CLUE WHAT THIS MEANS OR WHAT TO DO AT THIS POINT  

THANK YOU IN ADVANCE  

Link to comment
Share on other sites

hi thank you for the informaion I did order the part today

For some reason my tech said  he changed the part with the motor which i wasnt aware of

Ill double check when i get the part

Can you please tell me where the torque unit is??

He said that the PCB IS CONTROLLING THE MOTOR FUCTION IS THE PROBLEM

Im CLUELESS AT THIS POINT  

THANKS IN ADVANCE I APPRECIATE ALL THE HELP

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...