Jump to content

3311 printing half way


Recommended Posts

Does the white end of the print come out of the dryer first or last. I suspect 1st

If so look at the reverse unit arm, operate with the door open check that the arm unit is open when the print is fed in. the unit has a small black arm on the rear side that runs on a cam to hold the unit open. the arm can break so the paper hits the arm and stops feeding through the exposure area so you get a black line and unexposed white. you also have a banding line just above the microphone again the print is stopping for a brief time.

Link to comment
Share on other sites

  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...