Jump to content

2901 120 carrier part


Recommended Posts

I had a look at an old mask I had been given, but unfortunately the same part has disintegrated and fallen apart as well.

It seems to be a common issue with these masks.

My tip is when the mask is not fitted to the machine leave the top cover open. This stops the rollers always being in contact with each other.

What I think happens is the rollers get stuck together because of sitting in the same position, then when the mask is used the rollers try to turn but because they are stuck together they end up breaking and fall apart.

Also never clean the rollers with alcohol, this attacks the rubber and causes it to deteriorate. Only clean with a lint free cloth slightly moistened with water.

Link to comment
Share on other sites

Thanks Minilab service and Dave S for the replies. Good advice!

I can't get the part in Australia but found it online at panastra.jp  

Hopefully it will be sent from there soon.

Has anybody had any dealings with that firm?

Although they did send me an automated response and invoice they haven't as yet replied to a query on delivery time !

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...