chinnesse Posted January 14, 2012 Report Share Posted January 14, 2012 lps-24pro machine error low level stab 2 is thier anyway to bypass error to print need to replace tank fluid level. Quote Link to comment Share on other sites More sharing options...
CFJ Posted January 15, 2012 Report Share Posted January 15, 2012 Hi in the past i have swaped over say the bleach sensir to the stab sensir to see if it is a sensir error or a board error or see if the conators are wet or coroded if it is a fautly sensir untill you can get a replacement i have wired in to say the blech sensir somethink of the same temp i did thison my kis and it got me up and runing Regards Colin. Quote Link to comment Share on other sites More sharing options...
cpfallon Posted February 15, 2012 Report Share Posted February 15, 2012 I took a small piece of rigid tubing and extended the overflow standpipe in the tank. If you look at all of the standpipes, they all seem to be different heights..at least they were on my machine. Extending it makes the solution level higher, making the machine happy. Good luck! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.