MCphotolab Posted February 13, 2012 Report Share Posted February 13, 2012 Hi Everyone, I just found out that Kodak will be replacing Kodak Endura VC Paper with Kodak Endura Premier paper. Does anyone have any feedback/comments using this paper on a Noritsu QSS 37 series machine or anything similar? Can we use this paper as VC paper or do we have to get new profile data from Noritsu? I am expecting to get some paper to test in the next day or two. In the meantime any feedback would be appreciated. Thanks! Quote Link to comment Share on other sites More sharing options...
Magenta Posted February 14, 2012 Report Share Posted February 14, 2012 Lets hope the white is white and the black is black. It may take a while to get a profile if its dramatically different run a magazine balance on the new paper and it should be OK. If it is a big shift set up as a 2nd paper type even with the same profile, running the setup will rewrite the profile for that paper making any changes required to the black balance etc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.