Jump to content



Recommended Posts

Go into F, Menu, Cleaning the Focal Plane Regulating Guide, remove the Focal Plane Regulating Guide from the machine. (the lower leaver with the blue handle on it). Now see if the error will clear.

If it does check the Focal Plane Regulating Guide is not damaged or bent, if it looks OK, fit it back into the machine by going into the Cleaning the Focal Plane Regulating Guide mode above, ensure the guide is fully pushed into it home position.

If the error won't clear, check the wiring for the sensor is plugged in properly, it is the purlple, black & white lead to the left of the Focal Plane Regulating Guide.

See attached PDF.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...