Avishal Posted June 27, 2010 Report Posted June 27, 2010 i Have A Noritsu Qss 2711 machine i am facing a problem with my Paper Gamma all the White area on the paper has become yellowish. I have changed all the Chemicals (DEV/FIX/STAB) but these problem is still can any one help me on these
gg Posted June 30, 2010 Report Posted June 30, 2010 hy bad paper change and everything ok good luck beware of those who sell on net
Avishal Posted July 4, 2010 Author Report Posted July 4, 2010 thanks guys for your help.i did drain out the developer & replaced it with a new set of developer the problem was solved...
joe Posted July 30, 2010 Report Posted July 30, 2010 that is weird...that did not seem to be a developer problem at all...it seemed like a light leak or old paper??!!
polloda Posted July 30, 2010 Report Posted July 30, 2010 I had same problem when I changed all the chemical. I just print around 100~200pictures of 4x6 and the problem disappear. I don't know is the problem of chemical which is too old......
XXLtdLab Posted June 20, 2011 Report Posted June 20, 2011 Sorry for the late reply on this, have been watching this forum since '09 only joined today. . . THat is VERY OBVIOUSLY PAPER FOG. Why? Nototice the yellowish tinge, becoming full red toward the edges. When your D-min comes up with a bias towards those colors and it is non-uniform, often with "shadows" where only certain areas were fogged, you can tell it is the paper having been exposed to light. One way to avoid, literally, getting burned on old paper is to ask for a sample to test, say ten linear feet.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now