Jump to content

Laser temperature being adjusted problem


attila

Recommended Posts

Hello,help me please.So it constantly heats,the red laser temperature does not go over 24 celsius.On the 133 connector we have 2,5V,on the laser io pcb tp20 there is 0,7V, on the 134 connector is 0,5V.The cable contacts,and fans are ok.What is the problem? :(

Link to comment
Share on other sites

According to the troubleshooting flow chart if P133 has voltage that is above 0V and the R laser is below 31.5oC there is a failure in laser unit itself.

But check all the voltage test points on the laser I/O PCB first before condemning the Laser unit.

Link to comment
Share on other sites

  • 11 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100