Jump to content

3011 bent coner/paper jam 8' paper


urraro

Recommended Posts

When we try to print 8x10 or 8x12 prints, occasionally one will come out just fine, but usually, a corner is bent. Frequently this bent corner (we assume) causes paper jams. Especially when we try to print more than 1 8x10 at a time (say we need 3 8x10's of the same image, that sort of thing).  Any suggestions would be appreciated. Everything appears to be on track (lined up).. what could be causing the bent corner?

Link to comment
Share on other sites

  • 3 weeks later...

set the paper feed to 4" and pass a few prints then lift the racks and try and narrow down the search area, shorter feeds will skew easier so you can find any problems. the longer feed will normally push its way past any obstacle as its being driven by several rollers hence front edge damage.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100