BackPrint Posted May 5, 2011 Report Posted May 5, 2011 I have a Noritsu QSS-3201 SD, I'm having problems with spots on paper. I spend more on the role of 30.5. I show you a picture of the problem [/img]http://img834.imageshack.us/i/img156rv.jpg/ http://img834.imageshack.us/i/img156rv.jpg/ What do you think could be the problem? Thanks
Kevbo37 Posted May 5, 2011 Report Posted May 5, 2011 This is definitely debris on your rollers. Clean the crossover racks first then clean the other racks one at a time from the CD then BF and so on. Even the dryer section. Does this mark wipe off with a wet cloth?
mpphotos Posted May 5, 2011 Report Posted May 5, 2011 this is stabiliser left on the print, would be advisable to dump all the stb, then clean all the racks and crossovers, change the filters, then refill with fresh stb.
user4567 Posted May 6, 2011 Report Posted May 6, 2011 Because it is so well defined, I believe it is from the absorbing rollers in the dryer area. You should let these rollers in a bucket during the night, for a few days.
NeilT Posted May 12, 2011 Report Posted May 12, 2011 Would also say a stab problem, check also your first tank of stab, it may be filthy with bleach carry over
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now