Jump to content

Recommended Posts

Posted

No.5532The Processing Solution Safety Thermostat has activated.

any one can help me i have changed the filter and cleaned the machine....message is allready here*

tanks

Posted

When  safty thermostate engages use a stand alone thermometer and verify that the actual tank temp. is to high. If the tempeture in the tank is fine but the machine reads it as being high then you may have a faulty or dirty tempeture senser , or may need to recalibrate .  If the reading is high and the tank is indeed getting to hot you will have to look into the heater probe and or the SSRI that controlls the heater. If the heater is pulsing on and off properly then it may be the thermostate it self. The fist thing to do tho is to take a stand alone reading and verify that the tank is actualy to hot and go from there. You have already ruled out a circulation issue I am guessing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...