Jump to content

2802 Problem, help please!


theberah

Recommended Posts

Dear Everyone

I got the errors below after replacing Fiber Optic cable (Damaged by rats) for the processor control PCB:

No. 5533 "The Dryer Safety thermostat has activated"

No. 5532 "The Processing solution Safety thermostat has activated"

No.5508 "The processing solution level is too low"

No 0506 "Close the Dryer cover"

I  check using manual but the machine cant switch on the drive when I power up. Continuous red light flashes on the sorter to indicate abnormality.Where could I start at to cure this problem?

Thank you

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100