Jump to content

Need help matching colors in Intial Setup


eliteone

Recommended Posts

I have a Noristu 3501 and was doing the Intial Setup to bring colors back in balance due to replacement of AOM. When I ran setup on the 8inch paper things seem to balance out fine. When I tried to print on the 5inch roll of the same paper, my 5inch paper is completely unbalane(blue). Ran setup on the 5inch paper and the opposite happens on the 8inch.

My question is, what do I need to do so all the channels can be balanced? Your help is greatly appreciated, thank you.

Link to comment
Share on other sites

You need to do the initial setup on the paper size and surface you use the most of; which is normally 6" gloss.

After the initial setup has been done, you need to do the paper magazine/ registration setup for all the other paper sizes and surfaces.

Is the 5" & 8" paper the same paper type?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100