Jump to content

Recommended Posts

Posted

Hello Friend

I have a noritsu 3011 and when the machine is printing for example 100 copies suddenly the  photo change the color, some times magenta or yellow  and we need to do the set up calibration.

Somebody help me with this problem.

Sorry for my inglish.

THANKS

Posted

Your English is fine!

The most likely problem is one or maybe two of the laser AOM drivers going faulty.

I'd change the green AOM driver first, and see how the printing goes after that.

If the prints still go yellow, the blue AOM driver will also need to be replaced.

Posted

try to swap it as it described at our website:

www.minilablaser.com

and you will determine which AOM driver is faulty.

Very easy.

Do not forget to mark it before swapping!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...