Jump to content

scratch of the film comes on the print


Recommended Posts

I am facing problem in QSS-3001 if i scan a film having scratches it shows the same scratches on the monitor as well as on the prints.

I have tried by replacing digital ICE PCB to check but fault remains same then i have done scanner calibration starting from swing and tilt to focus when it says ok then again i tried to check same negative but i could not over come the fault same scratches are there.

i have checked the same negative on other QSS-3001 where i can not get scratches on the prints.

You can see the attachment pictures left side picture is from faulty machine and right side picture is from perfect machine

Please help me in rectfying this fault.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...