Jump to content

QSF-V30 cd bl fix temp not rising


Recommended Posts

If there are no errors dispalyed then something real easy to check:

Is the cover switch i/lock working. If not this will inhibit all the heaters from working, as well as many other components like pumps etc.

Lift up the processor cover, at the rear left next to the hinge, you'll find an actuating spigot that operates a microswtich which is a little concealed from the vision.

Diagram here shows location.....

If that's OK, stick a small screwdriver down there and you can hear the switch "click" and continuity  checks with meter then we'll have to dig a bit deeper.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...