Jump to content

Recommended Posts

Posted

As subject indicate

I'm helping a friend who runs a minilab in his photo store

Solution-path: new PSU + Board and see what happens

My assumptions

1.

Board doesn't quite have to be the same as long as it has w2k support

(from my reading my guess is that there's windows 2000 on the CT-2MD.

Could one eventually boost performance with a bigger CPU (not that there's a lot to gain on socket 370)?

Haven't taken it apart yet so I have no clue what CPU is in originally yet (do you know ... please tell :)  )

2.

PSU: something close to spec of original and size to fit in there.

Any tips on where to get that kind of PSU at a good price in the EU area

Actions to be taken

Image copy of the harddrive first of all

Exchange of defunct HW and get it "on" again

Using old setup/harddrive and start - to see if it works.

(crossing fingers during the process).

If I missed something don't hesitate to remind me :)

Things at hand (if any miss those parts we got them)

-----------------------------------------------------

- CT-2 Cell Phone Image Software (Type B).

- CT-2MD ver. 4.02C CD

- CT-2MD ver. 5.00

- Recovery CD for CT-2 ver. 1.01 disc 1 and 2

- CT-2 USB2.0 PCI Board driver

His minilab is a qss-3001, which from the reading I've done looks like it could need an upgrade of the PC to speed things up a bit.

Posted

A little update. Parts comming in Sunday/Monday and I'll start this cute little project.

I'll try and make some photo's along the way. Maybe they can help/assist others in here avoiding some pitfalls in the future :)

  • 3 weeks later...
Posted

hi

do you still have software cd's for the ct2 units? my unit just shows error file system32 not available. thanks for ant help you can give me.

thanks

paul

paul@maysphoto.com

Posted

Sure .... see you in the "Noritsu Registered section"

But you might consider making a windows 98 systemdisk and do a chkdsk before giving up

secondly .... manually "apply" new windows system files (the hidden ones)

+ command.com

It's a "certain" procedure you follow

But I'm carefull to just blow it all out before I know how savy you're in such matters

Posted

And with regard to the defunct CT2 ... pretty trivial ... as it was just the powersupply that was blown ..... so just a €39,- fix :)

Allthough I get a

Error: 925:

Certain hardware could not be recognized

Quit the application !!

Is this because it wants to be connected to a Noritsu machine or does the CT2 have other requirements that I don't know about ??

Thanks in advance for any tips

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...