Jump to content

mp-1600 error 9000


Tomb

Recommended Posts

No. 9000 Load voltage setting error

Canceling the alarm

Canceling the error message

Reset the power supply.

Condition

1. Load voltage is unstable and an error is sent from the

drive voltage PCB.

Diagnosis

(1) Reset the power supply and check that the error does not

recur.

(2) Failure in the MLVA unit

(3) Failure in the drive voltage PCB

Link to comment
Share on other sites

8. Machine type selection

Select the machine type.

TYPE 1: QSS-2701

TYPE 2: QSS-2711

When the SI-2000 is connected to the MP-1600, or when the

connected to the MP-1600, TYPE 1 or 2 must be set.

[TYPE 1]: When the SI-2000 is connected to the MP-1600

[TYPE 2]: When the DLS is connected to the MP-1600

9. Drive voltage PCB

Select the type of drive voltage PCB.

TYPE 1: Drive voltage PCB (J380142)

TYPE 2: Drive voltage PCB (J380167)

Link to comment
Share on other sites

2. Adjustments and precautions for PCB replacement

IMPORTANT a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

• When replacing drive voltage PCB (J380167) with the new one which the part number is same, carry out daily

setup.

• Regarding the machine which are (S/N 19510023), (S/N 19520006) and (S/N 19540001) or older, drive voltage

PCB (J380142) and data output PCB (J380116) from the initial lots are installed.

When replacing drive voltage PCB (J380142) from the initial lots with drive voltage PCB (J380167), replace data

output PCB (J380116) from the initial lots with data output PCB (J380168) simultaneously.

Then change the drive voltage PCB setting in [Machine specification],

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100