joe Posted April 16, 2010 Report Posted April 16, 2010 my machine keeps on thinking that the light is burned out....but it is not...it runs for a little while and than it errors...i think it is pcb j380096...do you have any ideas on how to fix or how to test the board or where to get this board? anything would help...thanks!
Jabbie Posted April 22, 2010 Report Posted April 22, 2010 Hi Noob I think there is nothing wrong with the board. You need to clean the air filters. Just open the Printer door you can see 3 or 4 air filters i guess. Just remove them and clean them. I had the same promblem before and thats the way i solved it. thanks jabbie
photocorp Posted April 23, 2010 Report Posted April 23, 2010 FYI: Here is a Noritsu Technical Bulletin (dated 2000) regarding your problem, which leads on from the above post.
amin_akbari Posted April 27, 2010 Report Posted April 27, 2010 hi u can check u'r filter wheel rotation on the input check menu for the filter wheel sensor
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now