we need software for uniformity at 2301

[fotobilen]

please, your will send software for uniformity at 2301.  

[LASEREPAIR]

fotobilen,

I would help you. I did many Uniformities for HRCRT, Sienna, Netprinter 812, e.motion 408. Yes, it's hard to perform, but nothing is special, as Magenta said. Basically FRED software is locked by HASP key, but I believe I still have version 4.0, which is the only could be run without HASP key. You need flatbed scanner Microtek ScanMaker 4 or 5. I'm not sure you will be successfull on X12usl, but you can try. There is a special calibration procedure for scanner before to go, but you can skip it and see if you are lucky guy. I kindly suggest to change the scotch on crt before to print the test pattern. Scotch tape must be Scotch original brand Type 850, transparent. Then you have to calibrate 12'' Glossy paper, clean the CRT surface with isopropyle, and go...

Please contact me by my general e-mail for more information.

LASEREPAIR

Noritsu Laser Repair

+1-512-695-2690

laserepair@gmail.com

Austin, Texas, USA

[fotobilen]

hello laserepair,

if have you a fred software for 2301HRCRT, would you add to here?  

i need fred software

[polloda]

I HAVE FRED 7.1, AS LASEREPAIR SAID IT HAS LOCK AND IT LICENCE THE SOFTWARE FOR ONLY 1 MACHINE.

TO DO FRED (UNIFORMITY) YOUR SELF

YOU MUST HAVE A SCSI CARD LIKE ADAPTEC AHA-2940

THEN HAVE A MICROTECK ARTIXSCAN 1100 or 1800f WITH SCSI CABLE

FINALLY TO HAVE A FRED SOFTWARE, YOU MUST BUY A LICENCE FROM averphoto.com (SIENNA COMPANY).

PS: IT ONLY WORK FOR WINDOWS 2000 OR XP.

DAVID