majortrouble Posted July 6, 2009 Report Posted July 6, 2009 If I get a virus in my 3300 what should I do because the tech said I should not install an anti-virus in the machine? Should I run the recovery CDs? and if so does it mean I will have to go back and perform initial set up and all that? We had trouble with the colorimeter during installation so I dont knowif I will run into the same problem again! Please advice! thanks!
Guest Posted July 6, 2009 Report Posted July 6, 2009 take a backup of the machine and than you can run recovery CD and after recovery,Install the system Disk followed by read the backup.
helper Posted July 6, 2009 Report Posted July 6, 2009 give this a go http://www.avast.com/eng/down_cleaner.html copy to your desktop and double click.When it is done just delete it if it bothers you
photocorp Posted July 6, 2009 Report Posted July 6, 2009 We had two occurences recently where a virus (e-mail) managed to get past our server and infect about about 50 work-stations in less than a minute..... this included all the minilabs. Recovery for the desktops took about 28 hours for the IT guys to sort out. We now run AVG on the Noritsu's (full version, not the free one) because its' easy to set up and configure. AVG antivirus has been installed on the Noritsus for many months without any issues although it's not active, so it's not continuously scanning the files. It's there should a threat present itself when we would update the definitions and then run a full scan. There may be some operational software conflicts should AVG be left running all day? probably slow down the image processing capabilties too I would susupect and "hang-up" the QSS. I "dunno", that's out experience, others may have run other Antivirus without problems! You don't have to do a clean install if you run the anivirus on the QSS which is an advantage. The problem is if you back-up or copy the desktop or other files to somewhere temporarily, they will have the be disinfected before downloading them back on to your QSS otherwise you run the risk of getting caught in a loop. We didn't have to go this extreme to recover our labs.....doing a full recovery I mean. Try AVAST as the previous post suggested. It's worth a try.
pumpkin Posted July 7, 2009 Report Posted July 7, 2009 Mainly, periodically make HDD backup images of properly working lab, using "Norton Ghost" or "Acronis TrueImage". Save they on two different places (removable media, etc). And you can recover system with Noritsu software and all settings per 20 min. If your lab is already infected, try to check minilab with standalone antivirus tools, for example DrWeb CureIt! or DrWeb LiveCD.
Magenta Posted July 7, 2009 Report Posted July 7, 2009 Noritsu are now using anti virus software Nod 32 its a cut down system that only looks at imported files. it will not delete a suspected file, it will not open it and gives a report message. Its a toss up between no protection and slowing file transfers down to a point that makes the system unusable. They do say you can Norton 2009 or some others, but they will not give them the term "recommended" as the software changes every time its updated.
majortrouble Posted July 7, 2009 Author Report Posted July 7, 2009 Thanks guys! I really appreciate your help! I am overwhelmed by your kindness!
philspectrum Posted July 7, 2009 Report Posted July 7, 2009 We have run avg free on our 3001 for years with no problem.
majortrouble Posted July 8, 2009 Author Report Posted July 8, 2009 Thanks everybody! I tried Dr Web and it worked like magic! Keep up the spirit!
majortrouble Posted July 8, 2009 Author Report Posted July 8, 2009 Photocorp thanks so much for taking your time to explain so much to me!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now