Synchronous Sensor Error 6073-0003

[cshah]

I am facing a problem in noritsu 3001 3-4 yrs old machine.

when machine is printing print quality is perfect.

suddenly Synchronous sensor error 6073-0003 is appears.

after restarting the machine it comes early or sometimes after printing few prints.

machine software version is G002.

i have swapped AOMs but error number is same.

i have swapped PCB above laser unit but error number is same.

when i swapped AOM cable (R,G, attached to main PCB, error number is changing.

please help me what will be the problem either a software problem or hardware  problem.

laser status G and B shows ok in GUI. problem is greyed.

if laser is gone how it is printing perfect quality prints around 1-5.

what will be the next stage for me?

can you people post me updated version of software cshah20@yahoo.com

[serjant]

Hi.

You need repair the laser unit.

I have assimilary problem.

You testing your laser unit with program " LASER SHELF DIAGNOSTIC" or no?

[CK]

Sorry My friend,

The laser is gone/on its way out.

There is a company in Singapore that is repairing them with orginal parts. I will try and get the deatils for you.

[Slaf]

I got the same problem i heard somewhere in Italy they sell blue laser and blue AOM for like 200-300 euro if anyone got any adreess or website  post it here

[kiki]

corect repair laser cost 9000€ + tax

[AJLA]

Try this company... profotos@neostrada.pl

[rbrito]

http://www.minilabhelp.com/forum/Blah.pl?m-1236604262/

[LASEREPAIR]

Dear cshah,

Please contact me by e-mail or phone. I will take care about your laser unit.

LASEREPAIR

Dmitry Senchakov

Location: Austin - Texas - USA

email: laserepair@gmail.com

Phone: +1-512-695-2690

Cost: 5.000$