Jump to content

2901 PCB error msg.


fazze
 Share

Recommended Posts

on the left side of the machine, open the cover which covers both PC and digital-ICE PCB. on the rear of the left side of the machine you will find an other cover and behind that cover on the rear wall you can find the Image Processing PCB. on the left bottom side of the PCB you c

Link to comment
Share on other sites

on the left side of the machine, open the cover which covers both PC and digital-ICE PCB. on the rear of the left side of the machine you will find an other cover and behind that cover on the rear wall you can find the Image Processing PCB. on the left bottom side of the PCB you can find the optical fibre cable this PCB is an Imaging Processing PCB.

Link to comment
Share on other sites

OK. I think i found the Image Processing PCB (although I think my my machine has number J390611) and I cleaned the dust, removed and cleaned the RAM modules, and re-inserted all the cables. However, the problem does not go away! :( .

Just to make sure I got the right PCB I have uploaded these 2 pics:

http://i548.photobucket.com/albums/ii358/fazzze/29122008060.jpg and http://i548.photobucket.com/albums/ii358/fazzze/29122008062.jpg

I wanted to check if the PCB is faulty or the memory modules!? Is it possible to use normal SD-RAM memory modules!?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...