Scorilo Posted November 20, 2008 Report Posted November 20, 2008 Hi friends, I work with minilab noritsu QSS-2901 end now i have a problem end i don`t now how to fixed. The normal pictures is broken like brush painting The 18 step emulsion print look normal (daily setup is good). This effect happening on all normal prints including prints from negative. Monnitor gama adjustment pictures is very good. The MLVA lamp is three week old end dicroic filters is clean. The colorimeter is ok. What hapenning? I attached one photo with this problem. Please help me! Thank you!
frenchman Posted November 20, 2008 Report Posted November 20, 2008 Hi, scorilo look this: Go to the service mode and make a mechanicle controle of the colorimeter ,all are explenation for this controle bye frenchman
Scorilo Posted November 22, 2008 Author Report Posted November 22, 2008 frenchman, I make calibration of the colorimeter end is no change. The result is identical. Example of photo bad end good in just time. The second photo is from monitor gamma calibration. , May you anyone anything suggestion?
zaidi1304 Posted December 12, 2008 Report Posted December 12, 2008 your probleme is on the mlva pcb i can resolve it contact me at mohaymen1304@hotmail.fr
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now