Jump to content

STRANGE YELLOW LINES


MOURI

Recommended Posts

Unfortunately this is normally a symptom of the blue laser starting to fail.

When the laser output reduces (due to the laser starting to wear out) the machine has difficulty in synchronising the laser beam properly, causing the alignment to go way off.

You may be able to bring it back into alignment using the exposure position adjustment.

But generally you will find it will keep shifting its position.

The only permanent solution is to have the laser unit refurbished/ replaced.

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100