Jump to content

Replinishment Pump output


cshah

Recommended Posts

Hello guys I am using 3001, by mistake i changed the replinishment pumpoutput /ML. and I entered 100mL for CD, 54mL for Bleach and 350mL for Stabilizer. (This is same set for Replinishment rate mL/M2) . But problem is my prints coulour and whiteness are getting change by hours and hrs.

Please help what should be the replinishment pump out put settings? I have already mentioned my replinishment rate.

Link to comment
Share on other sites

MR. C SHAH

THE PUMP OUTPUT IS A ACTUAL MEASURING OF PUMPS OUT OF CHEMICAL OF RPM

R.P.M.= ROUND PER MINUTS , SO PLEASE ACTUAL MEASURED THE PUMPS OUTPUT ON

MESURING CYLINDER AND PUT IN PUMPS OUTPUT`S BOX THE ACTUAL ML. IS OUTPUT

ON CYLINDER. AND PLEASE CHECK REPLINISHING SET UP ALSO IF YOU WANT TO CHECK

PER SQ. MTR OF CHEMICAL REPLINISHING IS A CD=108 ML BL= 54 ML AND STB = 350 ML

SO PLEASE CHECK THE PRINTS SIZE OF 4X6= 66 COPY PRINTS AND MEASURED CHEMISTRY

OR 17 8X12 COPY PRINT/ PROCESS AND MEASURE THE CHEMITRY IS A ACTUAL CHEMISTRY

SET ON REPLINISHR SET UP IS OK ???

THANKS

RUSHI

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...