Jump to content

Magazine Registration 2901


Recommended Posts

If you go to MLVA setup, paper magazine registration, set the 1 on the 127 size to 0, press yes, now set it back to 1, press yes, then click the registration/setup button, and setup the paper.

If the colour shade is on the 18 step setup prints it wall also appear on the actual prints.

Check the colorimeter is fitted in place properly i.e. no cables etc trapped underneath it. Clean the calibration plate.

If the MLVA lamp is old replace it, and do the MLVA lamp setup.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...