Jump to content

120 AFC in QSS 30


Guest

Recommended Posts

dear dave,

this I'd done already.RAM on Image Processing PCB are 256MB that mean it is 120 kit installed. Light source also done on 120AFC II neg carrier. when I inserted 120 film it gave an error 6820-16704 which mean "120 print is requested when there is not 120 print in the option"

Any Clue??

Link to comment
Share on other sites

Either the RAM on the image processing PCB is faulty or not compatible or not there is not enough of it. There are 2 sticks of RAM that have to be upgraded to 256MB (J66 & J67).

Try swapping the 2 sticks of RAM with the machine PC as a test.

Link to comment
Share on other sites

i think it is because of version J001. coz before that it was G002 and I updated it to H002 and than J001. If RAM has ay pblm, ARCNET communication error could be displayed.

Wht u think?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...