infocus Posted March 7, 2008 Report Posted March 7, 2008 We need a scanner unit for the QSS 2901 part # Z020110-01....anybody have a good used one they will part with? Might also need an AFC Scanner Control PCB # J390546-00 One of these is shot and we can no longer print from film. No light recognized in scanner unit, and film strip will only go in a couple of inches then stops.
Carlos Mayer Posted March 7, 2008 Report Posted March 7, 2008 We had similar problems in one of our 2901 and we had sent the scanner and a card to our Noritsu supplier in Japan to be repaired. All came back working properly. I suggest you to do the same. Tell the problem to Masahiko and my reference (Carlos Mayer, Argentina): sanko-jp@mua.biglobe.ne.jp Good luck! Carlos Mayer
infocus Posted March 7, 2008 Author Report Posted March 7, 2008 Carlos....Could you give us an idea as how much it cost you to do that? I was thinking it might be cheaper to swtich to a Pakar scanner or something similar.
Carlos Mayer Posted March 7, 2008 Report Posted March 7, 2008 Repairing cost for the scanner was around $ 3,000 while the repairing cost (later, exchange) of a Image Processing PCB was around $ 1,000. Carlos Mayer
infocus Posted March 8, 2008 Author Report Posted March 8, 2008 That's not too bad of a price...I'll try to contact them in Japan. Would you have their contact info? And, how long were you down for after sending the unit over?
Carlos Mayer Posted March 8, 2008 Report Posted March 8, 2008 Contact Masahiko at sanko-jp@mua.biglobe.ne.jp. Tell that I gave you his email address. Carlos Mayer
infocus Posted March 10, 2008 Author Report Posted March 10, 2008 Thanks Carlos...I'll see what they have to offer.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now