Jump to content

3011


noritsumaster

Recommended Posts

hi

i have a problem with a 3011 the problem is if i will make a light source registration  i ave a  error that is scanner change of light error and if i make a light source update i have a error that is ccd check error . i changed the scanner lamp the heat absorbing glass and i changed the d-ice pcb and the image processing pcb and also change the scanner unit . i think it is a software problem . can anybody help me whit this errors or can anybody send me the floppy initial data 1 and 2 ?

thank you very much

PAYAM

Link to comment
Share on other sites

tell me what's your numbers error / check and clean your optical fiber .

VERY IMPORTANT NEVER USE GAZ CLEANER WITH OPTICAL FIBER

frenchman

when you change any PCB on your 3011 it's very importante to upgrade the firmware for this use a disk password and go to/ menu /extention/ maintenance/upgrade and choose hdd upgrade.

try and tell if it's good

frenchman

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...