34 Pro, white sliver on trailing edge

[prodpi]

I have a 10" magazine setup, it is the only mag exhibiting this trouble.  I am getting a slight sliver or white on the trailing edge of 10x13 prints.  Ranging from .25 - 1mm.  I have a tech coming, but just wanted to see if any one had any tips in the mean time.

Thanks!

[Dave S]

You can try putting an exposure position correction into the print channel/s that you are having the problem with.

[prodpi]

We aren't using any channels, just strictly Net Order mode.  I will try to setup a channel and experiment though,

Thanks!

[prodpi]

Ok, Noritsu has come through for us again, nice and fast.  The TSR corrected:

Exposure Advance Corrections

Paper Advance Corrections

on our 10 and 12" magazines.

Great service again.