Jump to content

can 2901 print upto 20 inches


Recommended Posts

The problem on the 2901 is the distance from the exposure area to the CD rack is quite short. So even if somebody modified the software to allow longer than 457mm (18”) you are unlikely to get a print out that won’t have banding on it as the leading edge of the print will be in the developer while the trailing edge is still exposing.

On the MP-1600 the distance from the exposure area to the CD rack is a lot longer therefore prints longer than 18” are possible.

If you really need to do longer prints your best bet is to buy a 32 series that has this capability to start with  ;)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...