Jump to content

Problem in QSS 2701


Guest

Recommended Posts

Hi all! I am facing a problem in my QSS 2701 ( MP1600 ) on switcing it On, and after few seconds, the display screen shows that machine is booting and it showed fonts.sys loaded etc but suddenly it goes to japanese language and than shows as:

C:\#_

here # is a japnese character similar to symbol of Yen.

Can any body help? does it mean Flash drive lost OS or HDD lost OS?

Link to comment
Share on other sites

I take it your talking about the paper processor part of the machine (MP1600)

If so it looks like the flash drive has bad sectors on it or is knackered.

I think the OS (some sort of Japanese DOS) is stored on the flash drive.

The system software and backup data is stored on the hard drive.

You can attempt loading the system software floppy disks. (Insert disk 1A turn on power)

If that doesn

Link to comment
Share on other sites

  • 2 weeks later...

Hi friends,

Somehow I managed to start the machine again without removing anything from the machine . neighter I install the software again. there was a glitch in Bios setting.  Do you please let me know how and where I can find stand alone software for MP1600?

Link to comment
Share on other sites

  • 2 weeks later...

I think you need to load softare or the MP1600 DLS That machine has two hard drives the 32meg drive is corupted. It needs to be reformated. That is not hard. G001 is a good vershion that seems to have little to no problems. It ony has changes to manualy adjust arms or each magazine type. Good luck.

     QSS-2701

Software Version     NAC Part Number     TI Number     Prerequisite     Notes

H02     R503607-01     TI503607-01-00           Updated 12-16-03

G001     R503305-01     503305          

H001     R503407-01     503407          

G001     R503305-01     503305          

F002      R503157-01     503157          

F001     R503092-02(RA)  -04(SM)     503092          

E002     R503059-02(RA)  -04(SM)     503059          

E001     R502741     502741          

Hope this helps. If you have a question email me.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100