Jump to content

Problem with Canon W6400


Colopt

Recommended Posts

Am having problems with this printer, did a small print today was O.K then went to do 11"x14" and it printed with lines on page, did a few test prints an different paper, still got lines so decided to do a nozzle check, it looked pretty good but the light cyan was slightly patchy, so did a head clean. After doing the head clean printer won't allow me to print anything. Gives error message  "check printhead" which according to manual means printhead needs cleaning or needs new printhead. Have now done printhead cleaning a number of times & all it has achieved is a waste of ink.

Anything else I should try before calling a tech? I would be very disappointed if it needs a new printhead already as it hasn't had that much use.

Link to comment
Share on other sites

Replaced print head, also had to replace maintainence tank, all working perfectly again.

Just have to pay for it all now!

"Maintenence Tank" is a bit of a joke though, a plastic tray filled with foam which they charge AU$75.00 for.

Also makes you realize how much of that precious ink gets thrown away.

Cost of printhead very high too, about quarter of the total cost of new printer.

Link to comment
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...