Jump to content

strong cyan cast


Recommended Posts

That sounds like typical symptoms of CD contamination. Are the whites of the print also cyan?

With contamination you have no choice but to dump the tank and start again with a fresh CD tank mix.

Make sure you thoroughly wash out the CD tank, I would drain and fill it with water 3 times, run the machine for a while in-between changing the water to circulate through the pipework.

Check the CD rep tank as well to make sure bleach/fix has not been put in there by mistake.

Link to comment
Share on other sites

Yep, what Dave said, and don't forget to dump the developer filter! It does not take much to contaminate the dev and a little extra downtime now will save even more downtime in the future.

You will never get rid of contamination with a partial dump.

And don't forget your developer starter.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...