jorm Posted June 3, 2008 Report Share Posted June 3, 2008 Dear sirs Im looking at PakonF235 film scanner that i can have for good price, but the problem is that i need some software to operate the scanner, the person who owned the scanner has lost the software. So i checked pakon themself but they tell me that this is so old model that the new software from them PSI 3,0 dosen't work with so old model of the Pakon F235. So is there any other software i can use? Best regards Jens Quote Link to comment Share on other sites More sharing options...
dwijadas Posted June 4, 2008 Report Share Posted June 4, 2008 send me a message. I have PSI of 235 old version, can send you. Quote Link to comment Share on other sites More sharing options...
Miodek Posted September 9, 2008 Report Share Posted September 9, 2008 I have a F235 plus scanner but when I swamped the usb cables it has stopped scanning , the middle led just blinks red... is there a way to reset the usb on the PCB board ? or any other way to repair. The unit is from Ebay so i have no official support . Quote Link to comment Share on other sites More sharing options...
stuzyk Posted September 29, 2008 Report Share Posted September 29, 2008 hi, did you ever sort your F235 scanner, if not are you looking to sell it for parts as im looking for a certain part for mine As far as i know there is know way of resetting the PCB board or scanner, all i ever do is a re-calibration but this will not work with the red light flashing. Let us know Cheers Stuart Quote Link to comment Share on other sites More sharing options...
infraworld Posted September 30, 2008 Report Share Posted September 30, 2008 i have a f235 scanner but the software is 3.0 and not run, I need the the software 2.0 can you help me ??? thanks Quote Link to comment Share on other sites More sharing options...
rlmsi Posted November 3, 2008 Report Share Posted November 3, 2008 Is anyone using this scanner with Windows XP Pro? I just upgraded a client's computer from Win 2k to Win XP Pro & now the FE235 (v2.0 drivers) won't scan. Any ideas? Thanks, Rod Quote Link to comment Share on other sites More sharing options...
epc Posted July 15, 2009 Report Share Posted July 15, 2009 Hello, I am new to this forum and I hope someone here has Pakon software for my F235. My computer crashed and all I can find is my original CD and some upgrades, namely up to 2.1 build 0.4 beta and PSI 3.0. I need the ones in between in order to use the 3.0? Can someone help? Thanks. Charles Quote Link to comment Share on other sites More sharing options...
kelbas Posted February 26, 2010 Report Share Posted February 26, 2010 Hello, Could somebody clarify does Pakon F235 handle 24X56 Xpan type panoramic frames? Technically it doesn't seem to be problem since as far as I know F235 scans whole film roll as a single data stream. But the IbnSender software which is currently used for this scanner doesn't allow frame size to be other then 24X36. Is it possible with original software? I would really appreciate if someone who has it could send it to me. Thanks in advance! Vlad Quote Link to comment Share on other sites More sharing options...
Guest Posted February 26, 2010 Report Share Posted February 26, 2010 Unfortunately NOT.Pakon does not handle frame larger than 24X36mm. Quote Link to comment Share on other sites More sharing options...
kelbas Posted February 26, 2010 Report Share Posted February 26, 2010 Thanks for your response! Obviously I should proceed with a flatbed Epson for that type of frame now. Quote Link to comment Share on other sites More sharing options...
VREL Posted March 21, 2010 Report Share Posted March 21, 2010 Hello. I 'm looking for PSI 3.x Pakon scanner program, for manage F335. I can send PSI beta and extra, with drivers, for 235 type. Please reply me. Many thanks, Robert. Quote Link to comment Share on other sites More sharing options...
lukol Posted April 18, 2010 Report Share Posted April 18, 2010 pls how can install the pakonf235plus thus the partion N. Quote Link to comment Share on other sites More sharing options...
prima Posted April 18, 2010 Report Share Posted April 18, 2010 [face=Verdana]Do you have the manual? If you do it is all explained in it. If you don't, go to the IT shop and get for yourself one 40GB or greater but you must partition the greater size to have at least one 40GB size in it. Open your computer and install the hard disk (ensure your XP identify it during booting). Do not format the hard disk. Then open your control panel, select Performance and Maintenance, Select Administrative Tools, Select Computer Management, From the storage tab, select Disk Management. You can proceed from there - including partitioning and naming. Prima.[/face] Quote Link to comment Share on other sites More sharing options...
jm4595 Posted July 1, 2010 Report Share Posted July 1, 2010 I am trying to install the the software for the pakon F235 scanner. I have the original software but in win 2000 I have to manually install FX and then PSI software. I have the N drive partioned, but not formatted. The Qu is not going to the N drive as it should. I don't have software install instructions, only a pdf on software use. Does anyone know how to do this. Thanks Joe Quote Link to comment Share on other sites More sharing options...
JUANITA Posted July 11, 2010 Report Share Posted July 11, 2010 hi, i'm new to this forum i am having a problem with my F235 scanner. when i turn run the psi application it brings up an error code 235 and when i click ok it says that the application will shut down. pls i'll like to know what the error code means and what i can do. Quote Link to comment Share on other sites More sharing options...
chido Posted July 13, 2010 Report Share Posted July 13, 2010 i have a kodak pakon f235 plus.after scanning the negative film, with the hope to see pictures, at the end there is no pictures Quote Link to comment Share on other sites More sharing options...
ivancito Posted September 24, 2010 Report Share Posted September 24, 2010 hi I have the same escaner but i need the software can u send it to me a n then we can see the problem that you have thanksss Quote Link to comment Share on other sites More sharing options...
Sait Terekli Posted September 30, 2010 Report Share Posted September 30, 2010 http://www.minilabhelp.com/forum/Blah.pl?m-1248907648/s-new/#num5 Sait Terekli, for more info:email:saitterekli@hotmail.com Quote Link to comment Share on other sites More sharing options...
benjy Posted March 8, 2011 Report Share Posted March 8, 2011 Hello Sir My name is Ben, i am trying to install a pakon film scanner f235 plus. Actually i have already installed it on My system which is windows 2000, i have also installed the CD which is Kodak pakon F-X35. Which includes PSI FX35 3.0 After installing the cd and i try to use the scanner an error report comes up it says the error code is 1011, and it shuts down the application Please i will be greatful if you could mail me a solution to this problem thank you. Quote Link to comment Share on other sites More sharing options...
pepe21 Posted March 8, 2011 Report Share Posted March 8, 2011 did you guys do the raw partition and name it "N"? remember you cant format that partition and it can be less than a gb. Quote Link to comment Share on other sites More sharing options...
simba211 Posted August 16, 2011 Report Share Posted August 16, 2011 Hello Sir My name is Ben, i am trying to install a pakon film scanner f235 plus. Actually i have already installed it on My system which is windows 2000, i have also installed the CD which is Kodak pakon F-X35. Which includes PSI FX35 3.0 After installing the cd and i try to use the scanner an error report comes up it says the error code is 1011, and it shuts down the application Please i will be greatful if you could mail me a solution to this problem thank you. I have Idem problem Quote Link to comment Share on other sites More sharing options...
pepe21 Posted August 16, 2011 Report Share Posted August 16, 2011 again, have you guys done the "N" partition? other wise software wont work at all. it will be useless as the pakon software needs to see a raw partition. Quote Link to comment Share on other sites More sharing options...
simba211 Posted August 25, 2011 Report Share Posted August 25, 2011 partition is OK , but always error 1011 Quote Link to comment Share on other sites More sharing options...
simba211 Posted December 27, 2011 Report Share Posted December 27, 2011 Hello everyone, I have a problem, installed the drivers and the psi, but when I connect the scanner to the computer the computer finds the device but not against the drivers what can I do? is a hardware problem or software? sorry for my English Quote Link to comment Share on other sites More sharing options...
Photodog Posted July 25, 2014 Report Share Posted July 25, 2014 Help! Our Pakon F235+ computer crashed and the back up isn't. I need a copy of the software and setup instructions for the software. Tom Bailey 727-938-6594 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.