Jump to content

Need Repair Pcb Image Processing On Noritsu Qss 2901 Damage


Geo

Recommended Posts

Hello i need repair PCB image processing on Noritsu QSS 2901 damage.

 

Who can help me with this answer is very helpful.
I replaced the P210 memory with a regular computer memory and then not work,, remain blocked at this stage initial checks.

 

post-1330-0-32592400-1357068966_thumb.jpg

post-1330-0-67798800-1357068980_thumb.jpg

Link to comment
Share on other sites

Before considering repair, try

  - turn off the breaker

  - replacing original memory (or working new/used memory) back into Image Processing Board,

  - check all fiber optic cables going into the Image Processing Board, and the ARCNet card on the PC

  - then try turning it on again.

 

First thumbnail seems normal.  Second thumbnail says communications problem for PC talking to Image Processing Board.

 

Good Luck, and let us know how it goes.

Link to comment
Share on other sites

Dear friend I would prefer to fix the image processing PCB.

Price seems to be ok, if possible I'll send PCB damage + cost of repair and you send me the board image processing PCB Good Working Condition  .

This is to shorten downtime.

Sincerely, all the best!
Link to comment
Share on other sites

  • 7 months later...
  • 3 years later...
On 1/2/2013 at 4:19 AM, Big Dave said:

Before considering repair, try

  - turn off the breaker

  - replacing original memory (or working new/used memory) back into Image Processing Board,

  - check all fiber optic cables going into the Image Processing Board, and the ARCNet card on the PC

  - then try turning it on again.

 

First thumbnail seems normal.  Second thumbnail says communications problem for PC talking to Image Processing Board.

 

Good Luck, and let us know how it goes.

Sir Big Dave, I also experiencing this ARCNET Image Processing PCB problem. I have searched other forums and they mentioned D-ICE control PCB (but it is not for QSS 280 model). Mine is 2802. Does my machine also have this D-ICE control PCB as well?

I also found out there is an ARCNET diagnostic test software for QSS 3100 and up. But what could I use to check the connection for 2802?

Do you have an email for me to contact sir?

My email is jacky_works@hotmail.com

Thank you.

Jacky

Edited by Jacky.H
I forgot to add my email
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...