Jump to content

Kodak G3 Kiosk Screen Problem


Recommended Posts

Hello. I think in your kiosk is used Chunghwa TTL LCD and controller with GENESIS and MYSON chips. Do you have backlight? Probably it will be problem with inverter or back-light lamps. If one of lamps is bad inverter goes to protection mode. If it is backlight - you have to see image on your screen looking at the screen on angle. To see something you should shine screen with some external light source. If you will see image - then it is just baclight problem.

If you have back-light, but see dark image then LCD controller will be faulty. Few times had to repair them.

Have to say that touchscreen and LCD are absolutely different circuit ( not connected one with other ) .

Link to comment
Share on other sites

  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...