Jump to content

One Side Margin On 5' Prints On Qss 3212


miti

Recommended Posts

Hello, 5 inches prints from this machine comes out with one side margin, but 12 inches prints come out normal. i have adjusted the belts on the paper supply unit, swapped the motors and even changed the gears that drags the belts. No differece. What could be the problem please?

Link to comment
Share on other sites

Check the gripper pins on the arm unit 1 are gripping the paper properly.

If the white line is on the paper width side of the print adjust the exposure centre correction for that magazine in maintenance, various adjustment, printer mechanical adjustment.

If it is in the feed direction, you can use the exposure position correction in the print channel settings to adjust this.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...