Jump to content

Dks750 Cicclone Help


Recommended Posts



Have had to create another pc section for my dks750 using existing cards and hard drive however I am having problems with the cicclone card / driver installation.

It can not install the driver for it even though it picks the card up.

I have tried the drivers posted on one of the minilab help forums threads which was a setup.bat file which ran in a little window copied a file and then I rebooted but it hasn't helped.


I can see the "kis device" in the system section but when I automatically search for the driver it tries and then an error comes up of "an error occured during installation of the device. a service installation in the inf is invalid".


Can anyone point me in the right direction to cure the problem?


thanks in advance.


Link to comment
Share on other sites

  • 2 weeks later...


I think I am in a deeper hole now, I used the ghost disc that came with the machine and it looks as though it has set the machine back to kodak software and am having problems with it too.

The cicclone driver is now installed ok though.


Can anyone send me the dks750 software so that I can do a fresh install from scratch or provide any other suggestions.


thanks in advance.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...