Jump to content

Fault With Print Lamp Dks1550


Recommended Posts



Just had the printer lamp blow on my 1550, (which it had for certain!) I fitted a new one and now I can't get the 'burn out' to clear from the scree. I've tried 3 different bulbs, rebooting the machine etc. Any Ideas?


When I press stop/go, that turns green, the burn out disappears to be replaced by 'heating', but after a few seconds it goes back to 'burn out'

Link to comment
Share on other sites

It is the thermal protection fuse and it should burn out at 110C, but with a time it will burn out even at lower temperatures, good that You were able to solve it, that would be my second thing to check ;)


Thanks- This fuse must be 7 years old! I think I should get a spare- any e-bay links?  :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...