Jump to content

Sp3000 Scanner - Scanning Reversal & Cross Processed


Recommended Posts

Hi everyone,

I have a few questions regarding scanning these type of films:


1. 35 mm reversal films - the manual says that reversal films must be cut to strips in order to be scanned, however I know of a lab that can scan the whole film, without cutting it. Does anyone know how to do this?


2. 35mm negative cross processed films - the problem here is that the upper and lower edges of the films are transparent (instead of the usual brown edges), therefore the scanner doesn't know how to scan the film and prompts me to use the Multi-film Carrier MFC10AY instead. Does anyone know how to scan these cross processed films in the regular 35mm carrier?


Thank you very much!!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...